Cable Glands
Panels
Outdoor Industrial
Hazardous Areas
Solar
Data Centers
Approved by 80+ Utilities Worldwide
Gland types in metric and inch threads from M16 to M130, covering all cable and armour types - get verified
UL | IEC | BS | TÜV Tested and Certified
Guide to Installing Cable Gland for LV Cable Termination
Product Selection and Technical Support.
Guided Product Selector
Find the right Cable Gland in three simple steps
Select Cable Type
Select the cable construction you are terminating.
Select Installation Environment
Select where the cable gland will be installed.
Cable & Material Details
Enter your cable size, thread, and material requirement.
1
Step 1
Select Cable Type
Select the cable construction you are terminating.
2
Step 2
Select Installation Environment
Select where the cable gland will be installed.
3
Step 3
Cable & Material Details
Enter your cable size, thread, and material requirement.
FAQS
Frequently Asked Questions
Find quick answers to common questions about our programs, admissions, eligibility, and application process to help you move forward with confidence.
Axis manufactures nine industrial cable gland types covering unarmoured, steel wire armoured, steel tape armoured, and braided armoured cables. Available in plain brass and nickel plated finishes across metric, NPT, PG, BSP, and imperial thread options from M16 to M130.
Axis cable glands are manufactured to BS 6121 and certified to IEC 62444 standards. The range carries TÜV certification and is tested at an in-house NABL accredited, UL approved facility. IP ratings across the range cover IP3X and IP66 depending on gland type and application.
A cable gland secures and seals the end of a cable at the point of entry into equipment or an enclosure. It provides mechanical retention, ingress protection against dust and moisture, and earth continuity where required by the installation.
Cable gland selection depends on three factors — cable type, installation environment, and thread requirement. Axis provides a guided selection tool and sizing charts to identify the right gland type and size. For application-specific guidance, the Axis technical team can confirm the correct specification.
Axis cable glands are manufactured from brass with plain or nickel plated finish. Seals are made from thermoplastic elastomer. Shrouds are available in PVC and LSF halogen free material for installations where fire safety is a requirement.
Axis manufactures cable glands for use in industrial, oil and gas, and utility environments. For hazardous area classifications and zone-specific requirements, contact the Axis technical team to confirm the right gland type and certification for your application.