Reinforced Pole Top Bracket (BTR)
Reinforced Pole Top Brackets (BTR) support pin insulators at the top of utility poles, handling vertical loads and environmental stresses in overhead power lines. Manufactured from mild steel with a hot dip galvanised finish, they provide a mounting point for insulators supporting overhead conductors.
Overhead Power Lines
Conductor Support
Pole Line Hardware
Rigid Lines
Pin Insulator Mounting
Utility Pole Top
Selection Summary
Material : Mild Steel to IS 2062 Grade A / BS EN 10025
Channel Size : 75 × 40 × 4.8 × 7.5 mm, as per IS 808
Finish : Hot Dip Galvanised to BS EN ISO 1461
Coating Thickness : Average 86 Microns Minimum
Application : Pole Top Pin Insulator Mounting
Application Check
Is this product right for your application?
SPECIFICATIONS
Technical Specifications
FAQS
Frequently Asked Questions
Find quick answers to common questions about our programs, admissions, eligibility, and application process to help you move forward with confidence.
It is used to mount pin insulators at the top of utility poles, providing support for overhead conductors while handling vertical loads and environmental stresses.
The brackets are manufactured from mild steel to IS 2062 Grade A / BS EN 10025.
The specified channel size is 75 × 40 × 4.8 × 7.5 mm, as per IS 808.
The bracket has a hot dip galvanised finish to BS EN ISO 1461, with a minimum average coating thickness of 86 microns.
The listed standards are IS 2062 Grade A, BS EN 10025, IS 808 and BS EN ISO 1461.
Yes. Mounting holes, material grades, channel dimensions and lengths can be customised according to customer requirements and load specifications.