Busbar Sleeve

Heat shrinkable busbar sleeves insulate copper and aluminium busbars, helping reduce electrical leakage, tracking and flashover risks. Their crosslinked polyolefin construction fits round, square and rectangular bars for use in switchgear, substations and power distribution panels.
Flame Retardant
Halogen-Free
10 kV
35 kV
Metal-Clad
Metal-Enclosed
Bolted Connection
Marine
Offshore

Selection Summary

Voltage Options : 10 kV and 35 kV

Material : Crosslinked Polyolefin

Busbar Shape : Round, Square or Rectangular

Size Selection : Bar Dimensions and Sleeve Inner Diameter

Full Recovery Temperature : 125°C

SPECIFICATIONS

Technical Specifications

Variant As Supplied/mm ID (Min) As Supplied/mm Wall Thickness (±20%) After Recovered/mm ID (Max) After Recovered/mm Wall Thickness (±20%) Standard Length /mm(±5) Application /mm Width of Rectangular Busbar Application /mm Diameter of Circular Busbar
10kV WMPG 20 1 10 2.4 1000 20 15
10kV WMPG 25 1 12 2.4 1000 25 15
10kV WMPG 30 1.1 14 2.4 1000 30 20
10kV WMPG 40 1 17 2.4 1000 40 30
10kV WMPG 50 1.1 22 2.7 1000 50 35
10kV WMPG 65 1.1 28 2.7 1000 64 45
10kV WMPG 75 1.1 32 2.7 1000 75 50
10kV WMPG 85 1.1 37 2.7 1000 85 65
10kV WMPG 100 1.1 43 2.7 1000 100 75
10kV WMPG 120 1.1 53 2.7 1000 120 85
10kV WMPG 140 1.1 65 2.7 1000 150 100
10kV WMPG 180 1.1 75 2.7 1000 180 125
10kV WMPG 200 1.1 88 2.7 1000 200 150
10kV WMPG 220 1 88 2.7 1000 / /
10kV WMPG 250 1.5 107 3.6 1000 / /
10kV WMPG 290 1.3 107 3.8 1000 / /
10kV WMPG 325 1.1 107 3.8 1000 / /
10kV WMPG 350 1.2 159 2.7 1000 / /
10kV WMPG 400 1.2 185 2.7 1000 / /
10kV WMPG 500 1.2 210 3 1000 / /
35kV WMPG 20 2.4 10 4.5 1000 20 15
35kV WMPG 25 2 10 4.5 1000 20 15
35kV WMPG 30 2.4 14 4.5 1000 30 20
35kV WMPG 40 2.2 17 4.5 1000 40 30
35kV WMPG 50 2.2 21 4.8 1000 50 35
35kV WMPG 65 2.2 27 5 1000 64 45
35kV WMPG 75 2.2 31 5 1000 75 50
35kV WMPG 85 2 32 5 1000 85 55
35kV WMPG 100 2 38 5 1000 100 75
35kV WMPG 120 2.1 50 5 1000 120 85
35kV WMPG 140 2.1 59 5 1000 150 105
35kV WMPG 180 2.3 71 5.5 1000 180 125
35kV WMPG 200 2.2 88 5 1000 200 140
35kV WMPG 220 2 88 5 1000 / /

Request Quotation

FAQS

Frequently Asked Questions

Find quick answers to common questions about our programs, admissions, eligibility, and application process to help you move forward with confidence.

Heat shrinkable tubing is used to insulate, seal, and protect cables, wire bundles, splices, terminations, busbars, and connector-to-cable transitions.
Medium wall tubing is used for LV cable insulation and protection. Heavy wall tubing is used for medium-voltage applications where stronger mechanical, environmental, abrasion, corrosion, and chemical protection is required.
Adhesive-lined heat shrink tubing has an inner adhesive layer that bonds to the surface during shrinking. It helps seal the connection against water, moisture, fluids, and other contaminants.
Shrink ratio shows how much the tubing reduces in diameter after heating. For example, 2:1, 3:1, and 4:1 tubing recover to a smaller size depending on the application and diameter difference.
Anti-tracking heat shrink tubing is used in low-voltage and medium-voltage termination and jointing kits for insulation, tracking resistance, erosion resistance, and protection against accidental flashover.
Stress controlled heat shrink tubing is used in medium-voltage terminations and joints to control electrical stress around the semiconducting layer end.
Busbar insulating heat shrink tubing is used on busbars in switchgear and substations to provide insulation protection and reduce the risk of short circuit and electrical leakage.
Selection depends on voltage level, cable or busbar size, shrink ratio, wall type, sealing requirement, operating temperature, and special needs such as anti-tracking, flame retardancy, halogen-free performance, or high-temperature resistance.

Download Catalogue