Double Anchorage Crossarm

Double Anchorage Crossarms provide additional support and stability at conductor termination points and directional changes in overhead power lines. Manufactured from mild steel with a hot dip galvanised finish, they feature two horizontal beams for securing conductors under higher mechanical loads.
Power Distribution
Overhead Power Lines
Pole Line Hardware
Dead End Installations
Conductor Termination
Double Crossarm

Selection Summary

Material : Mild Steel to IS 2062 Grade A / BS EN 10025

Angle Profile : 60 × 60 × 6 / 70 × 70 × 7 / 80 × 80 × 8 / 90 × 90 × 8 mm

Phase Spacing (Ec) : 1050 / 1200 / 1500 / 1700 mm

Finish : Hot Dip Galvanised to BS EN ISO 1461

Coating Thickness : Average 86 Microns Minimum

Application Check

Is this product right for your application?

Application

Suitable?

Recommendation

Overhead Conductor Termination
Yes
Use Double Anchorage Crossarm
Directional Changes in Power Lines
Yes
Use Double Anchorage Crossarm
Higher Mechanical Load Applications
Yes
Confirm Required Load Capacity
Double Dead-End Insulator Arrangement
Yes
Use Double Anchorage Crossarm
1050 / 1200 mm Phase Spacing
Yes
Select Compatible Configuration
1500 / 1700 mm Phase Spacing
Yes
Select Compatible Configuration
Custom Dimensions or Mounting Holes
On Request
Confirm Requirements
Custom Material Grades
On Request
Confirm Tender Specifications

SPECIFICATIONS

Technical Specifications

Product Code Angle Profile Phase Spacing (Ec) (mm)
ADAA601050 60x60x6 1050
ADAA601200 60x60x6 1200
ADAA601500 60x60x6 1500
ADAA701050 70x70x7 1050
ADAA701200 70x70x7 1200
ADAA701500 70x70x7 1500
ADAA701700 70x70x7 1700
ADAA801050 80x80x8 1050
ADAA801200 80x80x8 1200
ADAA801500 80x80x8 1500
ADAA801700 80x80x8 1700
ADAA901500 90x90x8 1500
ADAA901700 90x90x8 1700

Request Quotation

FAQS

Frequently Asked Questions

Find quick answers to common questions about our programs, admissions, eligibility, and application process to help you move forward with confidence.

Double Anchorage Crossarms support conductors at termination points and directional changes in overhead power distribution and transmission lines.
A Double Anchorage Crossarm uses two horizontal beams with dead-end insulators to provide additional strength and stability at conductor termination points.
They are manufactured from mild steel to IS 2062 Grade A / BS EN 10025, with angle sizes as per IS 808.
The listed phase spacing options are 1050 mm, 1200 mm, 1500 mm and 1700 mm. The available combinations depend on the selected angle profile.
The crossarms are hot dip galvanised to BS EN ISO 1461, with a minimum average coating thickness of 86 microns.
Yes. Dimensions, mounting holes and material grades can be customised according to customer requirements and tender specifications.

Download Catalogue