E1Z Industrial Cable Gland
Brass indoor and outdoor cable gland suitable for steel tape armoured, plastic or rubber sheathed cable. Provides grip to the cable with outer and inner seals. Used in most climatic conditions, weatherproof and waterproof. Earth tags to be used for earth continuity. E1Z brass glands are also supplied with integral earth facilities. Recommended to use PVC shroud for additional ingress protection.
Indoor & Outdoor
Displacement Seal
IP66
BS 6121
Braided Armoured Type
Selection Summary
Cable : Steel Tape Armour
Material : Brass / Plain Brass or Nickel Plated
Sealing Technique : Compression & Displacement Type
Thread : Metric M16 to M90
Certificates & Approvals
IEC 62444:2010
BS 6121-1:2005
Application Check
Is this Gland Right for Your Application?
SPECIFICATIONS
Technical Specifications
FAQS
Frequently Asked Questions
Find quick answers to common questions about our programs, admissions, eligibility, and application process to help you move forward with confidence.
Axis manufactures nine industrial cable gland types covering unarmoured, steel wire armoured, steel tape armoured, and braided armoured cables. Available in plain brass and nickel plated finishes across metric, NPT, PG, BSP, and imperial thread options from M16 to M130.
Axis cable glands are manufactured to BS 6121 and certified to IEC 62444 standards. The range carries TÜV certification and is tested at an in-house NABL accredited, UL approved facility. IP ratings across the range cover IP3X and IP66 depending on gland type and application.
A cable gland secures and seals the end of a cable at the point of entry into equipment or an enclosure. It provides mechanical retention, ingress protection against dust and moisture, and earth continuity where required by the installation.
Cable gland selection depends on three factors — cable type, installation environment, and thread requirement. Axis provides a guided selection tool and sizing charts to identify the right gland type and size. For application-specific guidance, the Axis technical team can confirm the correct specification.
Axis cable glands are manufactured from brass with plain or nickel plated finish. Seals are made from thermoplastic elastomer. Shrouds are available in PVC and LSF halogen free material for installations where fire safety is a requirement.
Axis manufactures cable glands for use in industrial, oil and gas, and utility environments. For hazardous area classifications and zone-specific requirements, contact the Axis technical team to confirm the right gland type and certification for your application.