Nappe Voute (NVR)
Nappe Voute (NVR) crossarms support overhead conductors and insulators while distributing mechanical loads across utility poles. Designed with reinforced structural configurations for improved stability, they are available in NVR1, NVR2 and NVR3 variants with additional support angles depending on installation requirements.
Overhead Power Lines
Pole Line Hardware
Utility Pole Fittings
Suspension Lines
Pin Insulator Support
Reinforced Crossarms
Selection Summary
Type : NVR1 / NVR2 / NVR3
Material : Mild Steel to IS 2062 Grade A / BS EN 10025
Horizontal Angle Profile : 60 × 60 × 6 / 70 × 70 × 7 mm
Vertical Angle Profile : 50 × 50 × 6 / 60 × 60 × 6 / 70 × 70 × 7 mm
Support Configuration : Support Angle: 50 × 50 × 5 mm; Side Support: 40 × 40 × 4 mm (depending on variant)
Application Check
Is this product right for your application?
SPECIFICATIONS
Technical Specifications
FAQS
Frequently Asked Questions
Find quick answers to common questions about our programs, admissions, eligibility, and application process to help you move forward with confidence.
Nappe Voute (NVR) crossarms support overhead conductors and insulators while distributing mechanical loads across utility poles.
Three configurations are available: NVR1, NVR2 and NVR3. They differ in their angle profiles and additional support arrangements.
The crossarms are manufactured from mild steel to IS 2062 Grade A / BS EN 10025, with angle sizes as per IS 808.
The listed suitable pole size range is 140 mm to 320 mm.
The crossarms have a hot dip galvanised finish to BS EN ISO 1461, with a minimum average coating thickness of 86 microns.
Yes. Mounting holes and material grades can be customised according to customer requirements and tender specifications.