home > Poleline Hardware > Hardware > Buckles > Turn Buckle – Clevis To Clevis Type

Turn Buckle – Clevis To Clevis Type

Turn Buckles – Clevis to Clevis Type are used to adjust tension and slack in ropes, cables and other rigging assemblies. Manufactured from mild steel to IS 2062 Grade E250 with a hot dip galvanised finish, they are available in M12 and M16 diameters with lengths ranging from 200 mm to 250 mm.
Overhead Power Lines
Pole Line Hardware
Cable Tensioning
Rigging Assemblies
Clevis End Fittings
Tension Adjustment

Selection Summary

Material : Mild Steel, IS 2062 Grade E250

Diameter : M12 / M16

Length (L) : 200–250 mm

End Connection : Clevis to Clevis

Finish : Hot Dip Galvanised

Application Check

Is this product right for your application?

Application

Suitable?

Recommendation

Rope Tension Adjustment
Yes
Use Clevis to Clevis Turn Buckle
Cable Tension Adjustment
Yes
Use Clevis to Clevis Turn Buckle
Rigging Assembly
Yes
Use Clevis to Clevis Turn Buckle
Clevis End Connection
Yes
Select Clevis to Clevis Type
M12 Diameter Requirement
Yes
Select M12
M16 Diameter Requirement
Yes
Select M16
200–250 mm Length Requirement
Yes
Select Required Length
Non-standard Sizes
On Request
Confirm Availability

SPECIFICATIONS

Technical Specifications

Product Code Sr No COND. RANGE A (mm) B (mm) C (mm) D (mm)
DIA. ( MM )
ASCB01 1 3.0 – 18.0 146 55 19 16
ASCB02 2 10.1 – 22.6 204 65 29 16
ASCB03 3 12.7 – 26.5 222 73 38 16
ASCB04 4 25.5 – 37.4 254 90 42 16

Request Quotation

FAQS

Frequently Asked Questions

Find quick answers to common questions about our programs, admissions, eligibility, and application process to help you move forward with confidence.

It is used to adjust tension and slack in ropes, cables and other rigging assemblies.
They are manufactured from mild steel conforming to IS 2062 Grade E250.
Two standard diameters are available: M12 and M16, corresponding to 1/2 inch and 5/8 inch options, respectively.
The listed length range is 200–250 mm, equivalent to approximately 8–10 inches.
BS 3288 is the applicable standard, BS EN ISO 1461 applies to hot dip galvanising, and IS 2062 Grade E250 specifies the material grade.
Yes. Different sizes are available on request.

Download Catalogue