home > Lightning Protection > Surge Protection Devices

Surge Protection Devices

Surge Protection Devices
Globe

Approved by 80+ Utilities Worldwide

Lightning Bolt

SPDs for single and three phase systems across residential, commercial, and industrial applications.

Shield Check

IEC Tested and Certified

Gemstone

Guide to Install SPD

Question Circle

Product Selection and Technical Support.

selection criteria

Details Required to Select Surge Protection Devices

1
Step 1

Installation point

Select service entrance, main distribution board, sub distribution board, or equipment level.

2
Step 2

SPD type

Select Type 1, Type 2, Type 1+2, or Type 3.

3
Step 3

System voltage

Share the nominal voltage, such as 230 V AC single phase or 415 V AC three phase.

4
Step 4

Earthing arrangement

Confirm TN-S, TN-C-S, TT, or IT.

5
Step 5

Pole configuration

Confirm 1P, 2P, 3P, 4P, or 1P+N based on the system.

6
Step 6

Discharge rating

Share the required Iimp for Type 1, or In and Imax for Type 2.

7
Step 7

Voltage protection level

Share the impulse withstand of the equipment being protected, so Up can be matched.

8
Step 8

Application

Select building distribution, solar DC side, solar AC side, telecom, or control system.

9
Step 9

Indication

Confirm whether status indication, replaceable modules, or a remote signalling contact is required.

10
Step 10

Standard

Confirm IEC 61643-11, IEC 61643-31, IS 732, or UL requirement.

Learn From Our Engineers

Technical Guides and Resources

video

How to install SPD (Surge Protection Devices) at per IS 732?

How to install SPD (Surge Protection Devices) at per IS 732?
video

Surge Arresters or Lightning Arresters - What will protect you? ⚡

Surge Arresters or Lightning Arresters - What will protect you? ⚡
video

How to stop Power Surges at your House?

How to stop Power Surges at your House?

FAQS

Frequently Asked Questions

Find quick answers to common questions about our programs, admissions, eligibility, and application process to help you move forward with confidence.

Surge protection devices protect electrical equipment from transient overvoltages caused by lightning strikes, switching operations, and power surges. In industrial, commercial, and renewable energy installations where equipment reliability is critical, SPDs prevent damage to sensitive components and reduce unplanned downtime caused by voltage transients.
Axis SPDs are designed and tested to IEC 61643-31 standards, covering performance and safety requirements for surge protection devices in low voltage power distribution systems.
Type 1 SPDs are installed at the main service entrance to protect against direct lightning strike currents. Type 2 SPDs are installed downstream of the main distribution board to protect against residual lightning energy and switching surges. Type 1+2 combined devices provide both levels of protection in a single unit, reducing installation complexity where both functions are required.
SPD selection depends on the system voltage rating, phase configuration, type of surge exposure — direct or indirect — and the installation location within the distribution system. Type 1 devices are specified at the service entrance, Type 2 downstream. The Axis technical team can confirm the correct SPD type, voltage rating, and installation point for your specific system.
SPDs are a standard requirement in solar power installations to protect photovoltaic panels, inverters, and associated equipment from lightning-induced surges and grid disturbances. Axis Type 1, Type 2, and Type 1+2 SPDs are suitable for DC and AC side protection across utility-scale and commercial solar installations.
SPD manufacturers should comply with IEC 61643 for surge protection performance and UL certification for North American market requirements. ISO 9001 certification confirms that the quality management system governing manufacturing and testing meets international standards. Axis holds IEC 61643-31 compliance, UL certification, and ISO 9001:2015 certification across its SPD range.
Axis provides product documentation, technical specifications, and application guidance for SPD selection and installation. For project-specific requirements, the Axis technical team can advise on the correct SPD type, installation point, and system configuration.

Download Catalogue