Non Tension Connector (mm2)

Non-Tension Connectors join copper conductors end-to-end through a compression connection without providing tensile load support. Made from E-Copper with an untinned finish, they are available for conductor sizes from 25 mm² to 630 mm² and voltage ratings up to 36 kV
Crimping Connector
Copper Cable Splice
Inline Cable Joint
Electrical Cable Jointing
Cable Connection Accessories

Selection Summary

Conductor Material : Copper

Conductor Size : 25–630 mm²

Connector Material : E-Copper

Finish : Untinned

Voltage Rating : Up to 36 kV

Application Check

Is this product right for your application?

Application

Suitable?

Recommendation

Copper-to-Copper Cable Jointing
Yes
Use Non-Tension Connectors
End-to-End Cable Connection
Yes
Select the matching conductor size
Non-Tension Applications
Yes
Use where the joint does not need to carry tensile loads
Applications Up to 36 kV
Yes
Verify the complete cable jointing requirements
Aluminium-to-Aluminium Connection
No
Use Aluminium Compression Joints
Aluminium-to-Copper Connection
No
Use Bimetallic Joints
Conductor Size 25–630 mm²
Yes
Match the cable size with the available E-Code

SPECIFICATIONS

Technical Specifications

Product Code Cable Size mm2 Dimensions in mm
A C L
ANT0025 25 7 10 60
ANT0035 35 8.2 12.5 60
ANT0050 50 10 14.5 65
ANT0070 70 11.5 16.5 65
ANT0095 95 13.5 19 90
ANT0120 120 15.5 21 90
ANT0150 150 16.5 23.5 105
ANT0185 185 19 25 105
ANT0240 240 21.5 28.5 125
ANT0300 300 23.5 31.5 125
ANT0400 400 27.5 37.5 160
ANT0500 500 30 38 180
ANT0630 630 34.5 44 180

Request Quotation

FAQS

Frequently Asked Questions

Find quick answers to common questions about our programs, admissions, eligibility, and application process to help you move forward with confidence.

Non-Tension Connectors join two copper conductors end-to-end through a compression connection in applications where the joint is not required to support tensile loads.
The range covers conductor sizes from 25 mm² to 630 mm².
The connectors are rated for applications up to 36 kV.
The connectors are manufactured from E-Copper with an untinned finish.
No. These connectors are intended for non-tension joints. Applications requiring tensile load support need a suitable tension-rated connector.
Check the conductor material, cable size and voltage requirements. Then select the matching E-Code using dimensions A, C and L from the product table.

Download Catalogue