Single Anchorage Crossarm

Single Anchorage Crossarms provide a secure termination point for overhead conductors at the ends of power distribution and transmission lines. Manufactured from mild steel with a hot dip galvanised finish, they feature a single horizontal beam with dead-end insulators for installations with lower mechanical loads.
Power Distribution
Overhead Power Lines
Pole Line Hardware
Dead End Installations
Conductor Termination
Single Crossarm

Selection Summary

Material : Mild Steel to IS 2062 Grade A / BS EN 10025

Angle Profile : 60 × 60 × 6 / 70 × 70 × 7 / 80 × 80 × 8 / 90 × 90 × 8 mm

Phase Spacing (Ec) : 1050 / 1200 / 1500 / 1700 mm

Finish : Hot Dip Galvanised to BS EN ISO 1461

Coating Thickness : Average 86 Microns Minimum

Application Check

Is this product right for your application?

Application

Suitable?

Recommendation

Overhead Conductor Termination
Yes
Use Single Anchorage Crossarm
End of Distribution or Transmission Lines
Yes
Use Single Anchorage Crossarm
Lower Mechanical Load Applications
Yes
Select Suitable Configuration
Single Dead-End Crossarm Arrangement
Yes
Use Single Anchorage Crossarm
1050 / 1200 mm Phase Spacing
Yes
Select Compatible Angle Profile
1500 / 1700 mm Phase Spacing
Yes
Select Compatible Angle Profile
Custom Dimensions or Mounting Holes
On Request
Confirm Requirements
Custom Material Grades
On Request
Confirm Tender Specifications

SPECIFICATIONS

Technical Specifications

Product Code Angle Profile Phase Spacing (Ec) (mm)
ASA601050 60x60x6 1050
ASA601200 60x60x6 1200
ASA601500 60x60x6 1500
ASA701050 70x70x7 1050
ASA701200 70x70x7 1200
ASA701500 70x70x7 1500
ASA701700 70x70x7 1700
ASA801050 80x80x8 1050
ASA801200 80x80x8 1200
ASA801500 80x80x8 1500
ASA801700 80x80x8 1700
ASA901500 90x90x8 1500
ASA901700 90x90x8 1700

Request Quotation

FAQS

Frequently Asked Questions

Find quick answers to common questions about our programs, admissions, eligibility, and application process to help you move forward with confidence.

Single Anchorage Crossarms provide a secure termination point for conductors at the ends of overhead power distribution and transmission lines.
A Single Anchorage Crossarm uses one horizontal beam with dead-end insulators and is typically used in areas with lower mechanical loads. A Double Anchorage Crossarm uses two beams to provide additional support at termination points or directional changes.
They are manufactured from mild steel to IS 2062 Grade A / BS EN 10025, with angle sizes as per IS 808.
The listed phase spacing options are 1050 mm, 1200 mm, 1500 mm and 1700 mm. Available combinations depend on the selected angle profile.
The crossarms have a hot dip galvanised finish to BS EN ISO 1461, with a minimum average coating thickness of 86 microns.
Yes. Dimensions, mounting holes and material grades can be customised according to customer requirements and tender specifications.

Download Catalogue