IPC Bare to Covered

Insulated Piercing Connectors (Bare to Covered) connect bare conductors to Medium Voltage Covered Conductor (MVCC) systems for network extensions and upgrades. Available in single-bolt and double-bolt configurations, they provide low-resistance electrical connections while eliminating the need to strip insulation from the covered conductor.
Power Distribution
MVCC Accessories
MV Covered Conductor
Overhead Power Lines
Bare Conductor Connections
Network Upgrades

Selection Summary

Connection Type : Bare to Covered Conductor

Bare Conductor Range : 50–100 / 50–150 mm²

Covered Conductor Range : 25–100 / 50–150 mm²

Contact Plates : Tinned Copper / Aluminium Alloy

Certificates & Approvals

BS EN 50397-2

Application Check

Is this product right for your application?

Application

Suitable?

Recommendation

Bare to MV Covered Conductor Connection
Yes
Use Bare-to-Covered IPC
Existing Network Extensions
Yes
Select Compatible IPC
Upgrading Bare Conductor Networks
Yes
Use Bare-to-Covered IPC
Bare Conductor: 50–100 mm²
Yes
Select Compatible Variant
Bare Conductor: 50–150 mm²
Yes
Select Compatible Variant
Covered Conductor: 25–100 mm²
Yes
Select Compatible Variant
Covered Conductor: 50–150 mm²
Yes
Select Compatible Variant
Single-Bolt Configuration
Yes
Select 1-Bolt Variant
Double-Bolt Configuration
Yes
Select 2-Bolt Variant
Other Conductor Sizes
Not Specified
Confirm Availability

SPECIFICATIONS

Technical Specifications

Product Code Bare Side Conductor Range (mm2) Covered Side Conductor Range (mm2) Bare Side Conductor dia. (mm) Covered Side Conductor dia. (mm) Number of Bolts
MVCC94008B 50-100 25-100 9.2 – 12.8 11.2 – 18.8 1
MVCC94013B 50-150 50-150 9.2 – 16.3 13.9 – 22.4 2

Request Quotation

FAQS

Frequently Asked Questions

Find quick answers to common questions about our programs, admissions, eligibility, and application process to help you move forward with confidence.

It connects bare conductors to Medium Voltage Covered Conductors, particularly during network extensions and upgrades from existing bare conductor systems.
The bare conductor ranges are 50–100 mm² and 50–150 mm². The covered conductor ranges are 25–100 mm² and 50–150 mm².
The body is made from black high-strength engineering polymer, with tinned copper or aluminium alloy contact plates, galvanised steel fasteners and an aluminium, engineering polymer or composite shear nut.
No. The connector uses insulation-piercing contact points to establish an electrical connection without stripping the covered conductor insulation.
The connector is available in single-bolt and double-bolt configurations.
BS EN 50397-2 is the testing standard specified on the product page.
The connector provides quick installation, low-resistance electrical connections, reduced risk of conductor damage and reduced installation time.

Download Catalogue