Halogen-Free Heat Shrink Tube

Halogen-free heat shrink tubes insulate and seal wire harnesses, splices and connector-to-cable transitions. Their flame-retardant polyolefin outer layer and adhesive lining provide mechanical protection and moisture sealing, while the low-smoke formulation supports use in enclosed spaces.
Marine
Offshore
LSZH
Railways
Tunnels
Airports
Data Centres
Automotive
Aerospace

Selection Summary

Construction : Dual Wall, Adhesive-Lined

Outer Material : Polyolefin

Fire Properties : Halogen-Free, Low Smoke and Flame Retardant

Operating Temperature : −45°C to +125°C

Size Selection : Supplied and Recovered Inner Diameters

SPECIFICATIONS

Technical Specifications

Size Inch Size mm Supplied ID, Min. (mm) Recovered ID, Max. (mm) Recovered Total Wall (mm) Recovered Adhesive Thickness (mm) Standard Package Spool Length (m/spool)
3/32 2.4 2.4 0.8 0.85±0.15 0.40±0.10 200
1/8 3.2 3.2 1 0.95±0.15 0.40±0.10 200
3/16 4.8 4.8 1.6 1.10±0.15 0.40±0.10 100
1 /4 6.4 6.4 2.2 1.20±0.15 0.45±0.12 100
5 /16 7.9 7.9 2.7 1.35±0.15 0.50±0.12 100
3/8 9.5 9.5 3.2 1.45±0.20 0.50±0.12 50
1/2 12.7 12.7 4.2 1.70±0.20 0.50±0.12 1.22 OR 25M/Roll
5/8 15 15 5.2 1.80±0.20 0.55±0.15 1.22 OR 25M/Roll
3/4 19.1 19.1 6.3 2.00±0.20 0.55±0.15 1.22 OR 25M/Roll
1 25.4 25.4 8.5 2.10±0.25 0.55±0.15 1.22 OR 25M/Roll
1-1/4 30 30 10.2 2.20±0.25 0.60±0.15 1.22 OR 25M/Roll
1-1/2 39 39 13.5 2.40±0.25 0.60±0.15 1.22 OR 25M/Roll
2 50 50 17 2.70±0.25 0.70±0.15 1.22 OR 25M/Roll
5/2 64 64 21 3.00±0.30 0.70±0.15 1.22 OR 25M/Roll
3 75 75 25 3.00±0.30 1.00±0.20 1.22 OR 25M/Roll
7/2 90 90 30 3.00±0.30 1.00±0.20 1.22 OR 25M/Roll
4 100 100 34 3.00±0.30 1.00±0.20 1.22 OR 25M/Roll
5 125 125 42 3.00±0.30 1.00±0.20 1.22 OR 25M/Roll

Request Quotation

FAQS

Frequently Asked Questions

Find quick answers to common questions about our programs, admissions, eligibility, and application process to help you move forward with confidence.

Heat shrinkable tubing is used to insulate, seal, and protect cables, wire bundles, splices, terminations, busbars, and connector-to-cable transitions.
Medium wall tubing is used for LV cable insulation and protection. Heavy wall tubing is used for medium-voltage applications where stronger mechanical, environmental, abrasion, corrosion, and chemical protection is required.
Adhesive-lined heat shrink tubing has an inner adhesive layer that bonds to the surface during shrinking. It helps seal the connection against water, moisture, fluids, and other contaminants.
Shrink ratio shows how much the tubing reduces in diameter after heating. For example, 2:1, 3:1, and 4:1 tubing recover to a smaller size depending on the application and diameter difference.
Anti-tracking heat shrink tubing is used in low-voltage and medium-voltage termination and jointing kits for insulation, tracking resistance, erosion resistance, and protection against accidental flashover.
Stress controlled heat shrink tubing is used in medium-voltage terminations and joints to control electrical stress around the semiconducting layer end.
Busbar insulating heat shrink tubing is used on busbars in switchgear and substations to provide insulation protection and reduce the risk of short circuit and electrical leakage.
Selection depends on voltage level, cable or busbar size, shrink ratio, wall type, sealing requirement, operating temperature, and special needs such as anti-tracking, flame retardancy, halogen-free performance, or high-temperature resistance.

Download Catalogue