Insulators
11 kV
22 kV
33 kV
Overhead Distribution
Transmission Line
Product raNGE
Explore Products
Learn From Our Engineers
Technical Guides
and Resources
FAQS
Frequently Asked Questions
Find quick answers to common questions about our programs, admissions, eligibility, and application process to help you move forward with confidence.
Polymeric strain and pin insulators are available for 11 kV, 22 kV and 33 kV systems. Porcelain disc insulators for 11 kV, 22 kV and 33 kV. Stay insulators are available for 1.1 kV, 11 kV and 33 kV, However, we customise as per your requirements.
Use a pin insulator to support and electrically isolate conductors on overhead distribution lines. Use a strain insulator at tension points where the conductor experiences higher tensile loads, such as dead ends or other mechanically stressed locations.
Polymeric strain insulators are available with 40 kN and 70 kN breaking-load options, while polymeric pin insulators have a 10 kN mechanical breaking load. Porcelain disc insulators are rated at 70 kN. Stay insulators are available with tensile strengths of 53 kN, 88 kN and 110 kN depending on voltage rating.
The polymeric range provides creepage distances up to 1116 mm, depending on the insulator type and voltage requirement. Stay insulators are available with 48 mm, 57 mm and 95 mm creepage distances for 1.1 kV, 11 kV and 33 kV respectively.
Polymeric insulators use lightweight composite construction and offer resistance to UV radiation, pollution and moisture. Porcelain insulators use ceramic insulation with strong electrical and mechanical properties and are available in disc, pin, stay and shackle configurations.